ATOMSTACK A5 PRO product details
Attention hobbyists! Today we present you with the ATOMSTACK A5 PRO, an inexpensive laser engraver for the hobby room. Particularly beginner-friendly, the engraving machine is largely delivered pre-assembled. The structure is set up and ready to go in 10 - 20 minutes. The housing is made of an anodized aluminum alloy, which makes it light but also stable.
With a work surface of 410 x 400 mm, the A5 Pro meets most engraving and cutting requirements. The mainboard is a LaserBox V1.0 board with GRBL as firmware. LaserGRBL and Lightburn are fully supported. There is no SD memory card slot. Instead, you have to connect the laser engraver to a PC or Mac via USB.
With a power consumption of 40 watts, the laser power of the ATOMSTACK A5 PRO is around 5,3 watts. The laser point measures only 0,03 mm², so that particularly fine engravings and cuts are possible. Wood, plastics and leather, but also lacquered or non-reflective metals can be engraved. The laser cuts soft materials such as wood with a thickness of up to 5 mm. So that nothing gets in the eye when engraving with the ATOMSTACK A5 PRO, the laser is surrounded by UV protection (acrylic cover). You should still wear protective goggles!
Specifications
| data | Brand: ATOMSTACK Model: A5 Pro 40 W Type: laser engraving machine Material: aluminum + acrylic Laser: 40 W (4.5 - 5.5 W optical) Wavelength: 445 ± 5 nm Variable focus: No, fixed Engraving area: 410 x 400 mm Motherboard: 32-bit motherboard LaserGRBL (LightBurn) |
|---|---|
| Dimensions | Weight: 5,6 kg Size: 57 x 60 x 27 cm |
ATOMSTACK A5 PRO reviews
English review
German review
