JIMMY Matrix M9 Pro: From a single device to a modular system
The Matrix M9 Pro has a removable raw water tank, filters the tap water using reverse osmosis, and then dispenses it either at room temperature or heated. We are already familiar with this same principle from the JIMMY R9 Pro, which we tested a few months ago.
The key difference lies on the side of the device. Additional modules can be connected via the so-called AquaLink system. Currently, this is primarily the S9 for chilled sparkling water. An ice cube module, the I9, is also available.
A major advantage is that the system can be configured according to individual needs. Those who only want filtered and hot water can stick with the M9 Pro. Those who later want sparkling water can add the S9.
However, the whole system requires a fair amount of space. The M9 Pro measures 278 x 310 x 366 millimeters. The S9 adds another 198 millimeters in width. Together, the combination thus grows to almost 48 centimeters. That's significantly more footprint than a classic sparkling water maker or a single countertop filter.
Modular here means flexible, but by no means compact.
Go to shop
There is currently a discount code available for the JIMMY Matrix M9 Pro at [website name]. Amazon. With the code 7YGRI29Y you can save 14 percent until October 4, 2026 at 23:59 pm.
Im JIMMY Shop There are also cheaper bundles available: For the M9 Pro + S9, the code Techreview60 reduces the price by 60 euros, while for the M9 Pro + I9, Techreview110 saves a total of 110 euros.
Design and workmanship
Visually, we generally like the Matrix system. JIMMY continues to rely on a modern, largely enclosed housing and a clean front panel.
In direct comparison, we found the R9 Pro's control panel slightly more appealing. Its icons were simpler and therefore appeared more stylish overall. The M9 Pro is by no means cluttered, but its user interface feels a bit more functional.
Otherwise, the system makes a solid and high-quality impression. The M9 Pro weighs 7,5 kilograms, the S9 an additional 3,33 kilograms. Once assembled, the combination stands correspondingly stable on the worktop.
No installation at the water connection is necessary. The M9 Pro is set up, the removable 5-liter raw water tank is filled with tap water, and the device is plugged in.
Matrix M9 Pro filter system
JIMMY remains true to its filtration system as well. It advertises a seven-stage water purification process, with these stages distributed across three cartridges.
The following will be installed:
- an M2S composite filter with a planned lifespan of approximately twelve months
- a Q2S mineralization filter, also with a lifespan of approximately twelve months
- an RO-2.0S reverse osmosis membrane for up to 24 months
The composite filter first removes larger particles and substances such as chlorine or unpleasant odors. This is followed by the reverse osmosis membrane, which removes the majority of dissolved substances from the water.
JIMMY advertises the removal of up to 99,99 percent of certain contaminants, including heavy metals, PFAS, and chlorine. After osmosis, remineralization follows. This process is intended to restore minerals to the largely demineralized water and simultaneously round out the taste. Compared to tap water, the filtered water tastes significantly softer and more neutral.
UV-C and TDS display
JIMMY uses UV-C light to ensure hygiene. This is intended to prevent the already purified water in the system from becoming recontaminated with germs due to extended periods of inactivity.
Additionally, the M9 Pro monitors the TDS value of the raw water and the filtered water.
TDS stands for "Total Dissolved Solids," meaning the total amount of dissolved substances in the water. While this value doesn't directly indicate whether water is healthy or unhealthy, it's useful in a reverse osmosis system to understand how effectively the membrane reduces dissolved components.
5-liter tank and 3:1 wastewater ratio
The raw water tank holds 5 liters and can be completely removed from the device for filling.
As with any reverse osmosis system, a concentrate is produced during the filtration process, in which the retained substances collect. According to the manufacturer, the M9 Pro achieves a 3:1 ratio of purified water to concentrate.
For a countertop unit, this is a good value. The concentrate is not directed straight down a drain. Therefore, the unit doesn't require a fixed water connection. Instead, the more concentrated water remains in the raw water tank, which needs to be emptied and refilled regularly.
Hot water in seconds
One of the most practical features of the R9 remains unchanged in the Matrix M9 Pro: the integrated instantaneous water heater.
With a power output of 2.200 watts, it only heats the amount of water that is actually dispensed. Therefore, an entire tank does not need to be kept constantly warm.
There are seven temperature settings to choose from: room temperature, 45, 55, 65, 75, 85 and 98 °C. The water volume can be selected between 60, 150, 240 and 450 milliliters.
In practice, this combination remains a significant convenience advantage. For tea, for example, you can directly select 85 or 98 °C, while 45 °C is useful for preparing baby food, among other things.
The water is ready in just a few seconds. The M9 Pro can therefore actually replace a separate kettle in many households.
Matrix S9: Sparkling water as an expansion module
The new Matrix concept becomes more interesting with the S9. The 198 x 310 x 402 mm add-on block is connected to the M9 Pro via AquaLink and cannot be operated independently. The required water therefore comes directly from the M9 Pro's filter system.
Instead of carbonating tap water with a separate Sodastream, already filtered and remineralized water goes directly into the carbonator, which has a 0,75 liter cold water tank.
JIMMY specifies a target temperature of 10 to 15 °C. This also describes our practical experience quite well, as the water is pleasantly cool, but not really ice-cold, like water from a refrigerator.
Carbonation: Sodastream remains strong
The S9 works reliably during the actual carbonation process, but requires a little more patience than, for example, a Sodastream to achieve the same carbonation level.
Three sprays give us a result roughly in the "medium" range. Those who prefer a strong, classic sparkling water will need closer to six sprays. We achieve comparable results more quickly with a SodaStream.
On the other hand, CO₂ compatibility is a positive feature. JIMMY doesn't use exotic proprietary cartridges, but supports standard screw-on CO₂ cylinders. These cartridges are available in many supermarkets, drugstores, and beverage stores.
According to JIMMY, one cylinder should be enough for up to 60 liters of sparkling water. As always, the actual amount depends heavily on how much carbonation you prefer.
Two water bottles included
The S9 comes with two reusable plastic bottles, each with a capacity of 500 milliliters.
However, caution is advised when cleaning. The plastic bottles are not heat-resistant and should therefore never be cleaned with boiling water.
Very hot water can deform or damage the plastic. For normal cleaning, warm water with a little dish soap is perfectly sufficient. Replacement bottles are available in the JIMMY online shop for the recommended retail price of €29,99.
